$6,390.00 Factory Direct
Our diamond floor tilt car trailers are manufactured with a rigid 5″ channel frame and tongue. The entire bed tilts for loading and is built with all tubing steel construction. 24″ toe plates and the gradual loading angle, made possible by a total bed length (with toe plates) of 22′, make it possible to load sports cars with low clearance that will not load on standard ramp and dovetail car trailers. A hydraulic damper cushions the lowering of the bed during loading. Additional standard features on this high quality car trailer include a swing up jack, heavy duty diamond plate fenders, four-wheel brakes, radial tires, stake pockets with rub rail, and a sealed modular wiring harness with lifetime LED lights.
CALL CUSTOMER SERVICE WITH QUESTIONS: 866-455-7444
Specifications G.V.W.R. | 7,000 lb. |
Electrical | Sealed modular wiring harness with LED lights |
Frame | 5 in. channel, and 4 in. x 3 in. tubing |
Dovetail | 24 in. toeplates |
Upper Deck | N/A |
Side Rail | N/A |
Tongue | 5 in. Channel |
Tires | 205/75 R15 (1,820 lb.) Radial |
Floors | Full diamond plate with 3 in. channel crossmembers 24 in. oncenter |
Coupler | 2-5/16 in. A-frame ball coupler |
Safety Chains | Heavy duty safety chains |
Ramps | N/A |
Tie Downs | Stake pockets and Rubrail |
Deck Length | 20 ft. + 2 ft. toeplates (with hydraulic damper cylinder) |
Deck Height | N/A |
Deck Width | 82 in. Between fenders |
Fenders | Heavy duty diamond plate fenders (6IN. HIGH OVER DECK) |
Lower Deck | N/A |
Brakes | Both braking axles, Standard |
Tailgate | N/A |
Wheels | Silver or white mod (Based on stock) |
Jack | 2,000 lb. Swing up jack |
Axles | 2 - 3,500 lb. e-z lube braking axles, Standard |
Suspension | Double eye springs |
Toolbox | N/A |
Finish | Primed, 2 coats of automotive grade enamel, pin striped |
Additional Options Spare tire and rim | $145.00 |