$6,990.00 Factory Direct
Our diamond floor tilt car trailers are manufactured with a rigid 5″ channel frame and tongue. The 10,000 GVWR model adds 5.2K axles with 225/75 R15 LRD radial tires. The entire bed tilts for loading and is built with all tubing steel construction. 24″ toe plates and the gradual loading angle, made possible by a total bed length (with toe plates) of 22′, make it possible to load sports cars with low clearance that will not load on standard ramp and dovetail car trailers. A hydraulic damper cushions the lowering of the bed during loading. Standard features on this high quality tilt trailer include a swing up jack, heavy duty diamond plate fenders, four-wheel brakes, radial tires, stake pockets with rub rail, and a sealed modular wiring harness with lifetime LED lights.
CALL CUSTOMER SERVICE WITH QUESTIONS: 866-455-7444
Specifications | G.V.W.R. | 10,000 lb. |
| Electrical | Sealed modular wiring harness with LED lights |
| Frame | 5 in. channel, and 6 in. x 2 in. tubing frame on tilting bed |
| Dovetail | 24 in. toeplates |
| Upper Deck | N/A |
| Side Rail | N/A |
| Tongue | 5 in. Channel |
| Tires | 225/75 R15 (2600 lb.) Radial |
| Floors | Full diamond plate with 3 in. channel crossmembers 16 in. oncenter |
| Coupler | 2-5/16 in. Adjustable coupler |
| Safety Chains | Heavy duty safety chains |
| Ramps | N/A |
| Tie Downs | Stake pockets and Rubrail |
| Deck Length | 19 ft. 8 in. + 28 in. toeplates (with hydraulic damper cylinder) |
| Deck Height | N/A |
| Deck Width | 82 in. Between fenders |
| Fenders | Heavy duty diamond plate fenders (6IN. HIGH OVER DECK) |
| Lower Deck | N/A |
| Brakes | Both braking axles, Standard |
| Tailgate | N/A |
| Wheels | Silver or white mod (Based on stock) |
| Jack | 2,000 lb. Swing up jack |
| Axles | 2-5,200 lb. e-z lube axles |
| Suspension | Double eye springs |
| Toolbox | N/A |
| Finish | Primed, 2 coats of automotive grade enamel, pin striped |
| Spare tire and rim | $180.00 |
| 6K Winch | $950.00 |
Kaufman Trailers
